notizie sull'azienda What Is a Surge Protection Device (SPD)? A Complete Guide to Type 2 SPD Selection

What Is a Surge Protection Device (SPD)?

A Surge Protection Device (SPD), also called a surge arrester or surge protector, is an electrical component designed to protect equipment and installations from transient overvoltages. These voltage spikes — caused by lightning strikes, switching operations, or industrial noise — can permanently damage sensitive electronics or cause costly downtime. An SPD limits the transient voltage and diverts the surge current safely to earth.

How Does an SPD Work?

Inside every good SPD is a metal oxide varistor (MOV) — a component whose resistance drops sharply when the voltage exceeds a safe threshold. When a surge occurs:

• The varistor conducts instantly and clamps the voltage to a safe level.
• The excess surge current is diverted to the ground, away from your equipment.
• Once the surge passes, the SPD returns to its high-resistance state.

Modern modular SPDs also include a thermal disconnection device and a status window that turns red when the module reaches end of life, so maintenance is quick and safe.

Types of Surge Protection Devices

Surge protection devices are classified according to IEC/EN 61643-11:

Key Parameters to Consider When Choosing an SPD

• Max continuous operating voltage (Uc): e.g. 275 V for a 230/400 V system.
• Nominal discharge current (In): the current the SPD handles repeatedly (e.g. 20 kA).
• Maximum discharge current (Imax): the peak single-surge capacity (e.g. 40 kA).
• Voltage protection level (Up): the residual voltage your equipment sees (e.g. ≤1.3 kV).
• Response time (tA): faster is better — high-quality units respond in ≤25 ns.
• Pole number & mounting: 1P to 4P, typically on 35 mm DIN rail.

Common Applications

• Low-voltage distribution boards in residential, commercial and industrial buildings
• Three-phase TN-S and TN-C-S systems
• Photovoltaic (PV) and DC power systems
• Data, signal and telecom lines
• LED lighting and control cabinets

How to Choose the Right SPD

Selecting the correct device is about matching the protection level to the risk and the system. In practice:

1. Identify the surge exposure and where protection zones (LPZ) meet.
2. Match Uc to your system voltage.
3. Choose the type by location — Type 2 in sub-distribution boards.
4. Confirm Imax/In meet the local installation standard.
5. Check certifications such as CE, TUV and compliance with EN 61643-11.

Why Choose Britec Electric?

Wenzhou Britec Electric Co., Ltd. has specialized in surge protection devices since 2003. With an in-house test laboratory, more than 22 years of R&D experience, Britec delivers reliable AC and DC SPDs, data lightning protection and LED surge protectors — most certified to CE and TUV. Typical delivery is within three weeks, and products carry a five-year warranty.

FAQ

What is the difference between an SPD and a surge protector? They are the same device; “SPD” is the standard technical term used in IEC/EN 61643-11.

How long does an SPD last? MOV-based devices degrade with each surge. Most quality SPDs last several years and indicate end-of-life via a status window.

Conclusion

A surge protection device is a small investment that prevents expensive damage. Understanding SPD types, key parameters and applications helps you specify the right protection for every installation. Contact Britec Electric for expert advice and a quotation on Type 1, Type 2 and Type 3 surge protection devices.